Produse pentru corect și (8)

Fine-tune straightening for heavyweight fabrics The special strength of the Orthopac GMFRC is the extremely high straightening accuracy at relatively small distortions. Thanks to reinforced components, it is ideal for processing really wide, heavyweight materials such as denim. The compact straightening unit is equipped with a skew and bow roller as standard. This arrangement allows for very fine adjustment of the straightening effect while permitting small device dimensions.

The cleaning process must be designed to eliminate specific contaminants and particles from machined workpieces and parts in order to achieve the required technical cleanliness. For the wet cleaning of parts, the four parameters of the Sinner's Circle need to be combined and adjusted for optimised efficiency. PERO units offer efficient cleaning mechanics and reliable process control. According to the Sinner's Circle, the cleaning result is determined by four basic variables. By adjusting and combining these interrelated variables, it is possible to optimise any cleaning process. Good mechanical design of a cleaning unit optimises the mechanics of the process, which generally means that cleaning is completed in less time and with less resources.

Mit automatischen Durchlaufstanzen verschmelzen Maschine und Werkzeug zu einem Hochleistungssystem mit großer Stückzahlleistung und beeindruckender Flexibilität. Ob Dichtungsprofile für die Automobilindustrie, Anwendungen für Möbel oder Wärmeschutz für Gebäude bzw. Haushaltsgeräte – hier sind oft komplexe Beschnitte erforderlich. Mit automatischen Durchlaufstanzen von Metzner können Bearbeitungsvorgänge wie Konturschneiden, Bohren und Fräsen in einer Durchlaufanlage integriert werden. Alle diese Maschinen speichern sämtliche Bearbeitungsparameter und Maschineneinstellungen in einer Bearbeitungsrezeptur. Beim Produktionsstart aktiviert ein eingebauter BarcodeScanner anhand der Arbeitspapiere alle Voreinstellungen und informiert zugleich am Maschinendisplay über das richtige Werkzeug und Material. Der Barcode enthält auch die erforderlichen Stückzahlen und längen. HERKUNFTSLAND:Deutschland

Fine-tune straightening of residual distortion This model represents a compact fine-straightening system for the correction of residual distortions. The special strength of the Orthopac MFRC is the extremely high straightening accuracy at relatively small distortions. The compact straightening unit is equipped with a skew and bow roller as standard. This arrangement allows for very fine adjustment of the straightening effect while permitting small device dimensions. Available with hydraulic or electrical straightening roller adjustment.

Bow and skew detection and control The Orthopac FMC automatic straightener is the heart and core of the Orthopac. The device consists of an optical scanning system and electronic control for distortion correction. It is used primarily to detect and log residual distortions in the exit end of a system, e.g. with the stenter. Thread density can be determined at the same time. It can also be connected to external straightening machines then serving them as control unit.

Weft straightening the way it should be ... The Orthopac RVMC is the universally employable straightening system from Mahlo for the correction of web distortions for nearly all applications. Available with hydraulic or electrical straightening roller adjustment. The modular construction allows the system to be configured to meet the demands of changing conditions and requirements.

Pattern and distortion control The leading pattern detection system using camera technology. The repetitions of printed, woven or tufted patterns are evaluated according to certain algorithms and are used for measuring, correcting and evaluating distortions and patterns. The system uses one or two cameras, depending on the width of the product, to detect the position of the pattern and automatically and continuously determine the pattern repeat, as well as the product width, and together with a straightening machine align the product distortion based on the recognized pattern.

Cleaning of machined parts (after turning, milling, drilling, etc.). Particularly suitable for the removal of graphite, AW and EP additives, salts, soaps, and emulsion residue. Generally suitable for the removal of dust, metal chips, surfactants, stearates and polishing paste. Preparation of parts for downstream processing such as joining (by clinching, etc.), assembly and packaging. Cleaning of machined parts (after turning, milling, drilling, etc.). Particularly suitable for the removal of grease, oil, wax, resins, corrosion protection agents and esters. Generally suitable for the removal of dust, metal chips, surfactants, stearates and polishing paste. Preparation of parts for downstream processing such as joining (by clinching, etc.), assembly and packaging. Cleaning of machined parts after turning, milling or drilling, grinding, polishing, lapping and honing, punching and forming (stamping & bending, deep drawing, extruding, etc.).